Mobile Diesel Hydraulic Power Unit Explosion Proof 300 L 2600 R/min

Mobile Diesel Hydraulic Power Unit Explosion Proof 300 L 2600 R/min

Product Introduction

Diesel series of hydraulic power units have the step less speed control system to adjust different speed requirements, and we have the imported engine with the light weight , strong power and stable operation. The HS-36 diesel hydraulic power unit can heat itself in low temperature environment, it can self-heated in under -10 ºC ambient temperature, very suitable for cold season or area.

Industry Application

HS series of diesel hydraulic power units, can meet the requirements of various industries, such as: Petrochemical Plant, Power Station, Nuclear Power Station, , Boiler Plant, Refinery.

Features

■ Diesel engine, pumps are all imported, boasting stable performance and long service life.

■ Without connecting to the electric power, the diesel hydraulic unit is very suitable for field, factory working conditions.

■ Supply stable and efficient power with the optimized hydraulic systems.

■The HS-36 diesel hydraulic power unit can heat itself in low temperature environment.it can self-heated below -10 ºC ambient temperature, very suitable for cold season or area.

Technical Parameters

Equipment Overview

■ The Diesel hydraulic unit HS-36 consists of a diesel engine and a gear pump. The entire hydraulic system, using a one-piece structure, it also makes the pipe connection easier with quick change connector.

■ The oil cooling system can ensure that the equipment operates continuously within 40 ℃ ambient temperature;

■ The integrated control box can achieve starting, stopping and warming up function.

■ Drilling and cutting can be achieved with the use of double oil passages. A separated oil passage can also be used.

■ The quick connector can be quickly plugged and pulled without leakage to ensure that users can quickly access.

Operating Steps of Hydraulic Unit

■ Select the suitable oil passage and connect the hose between the operating valve block and the load. The fitting needs to be tightened to ensure no oil leakage, also connect the hydraulic hose to the hydraulic motor.

■ The machine needs to be heated when the ambient temperature is below 10 ℃. The hydraulic oil will be automatically heated at low temperatures. Just open the cabinet inside the inverter switch and push the switch to “On”, the system will automatically preheat for 15mins, then the cabinet heats up the indicator lamp which will always be on. The heat will be extinguished when the lamp is ended. At the same time, make sure the ball valve handle is in the OFF position, and then turn the start key to the START position to start the diesel engine. For more detailed diesel engine maintenance, please refer to the operating instructions of the diesel engine.

■ Turn the ball valve in the figure below slowly clockwise (the maximum rotation angle is 90 °) and observe the rotation speed of the load to reach the appropriate speed.

■ Oil cooler governor valve and relief pressure regulator has been adjusted before leaving the factory. It’s not necessary to operate in the use of the process. And only need to adjust the corresponding oil throttle valve to adjust the speed of the oil load.

■ When finished, turn the ball valve counterclockwise to position the ball valve handle and turn the control key to the OFF position to stop the engine.

Attention

■ If any equipment has abnormal sound in the follow-up process, please stop using equipment and contact the manufacturer immediately.

 
■ It stores in a cool and airy warehouse. Must keep it away from the fire, heat, seepage and rain.
■ It should be kept separately from oxidants and halogens, and must not be mixed.
■ It adopts explosion-proof lighting and ventilation facilities. The mechanical equipment and tools, which are easy to produce sparking, are prohibited.
■ The storage area shall be equipped with emergency disposal equipment and suitable storage materials.