Low Noises 1.43 Kw Portable Pipe Beveling Machine High Strength Aluminum

Low Noises 1.43 Kw Portable Pipe Beveling Machine High Strength Aluminum

Product Introduction

BPP series of internal-expanding pipe beveling machine is the pipe processing equipment independently developed by our company based on the market and prospect of the pipe service industry. The products are portable, precise, efficient and in modular design, fully meeting customer demands. It's designed for simultaneous facing and beveling tubes and pipes (including carbon steel, alloy steel and stainless steel) from 12.5mm to 240mm I.D. up to a wall thickness of 0.75" (18mm).

Features 

■ Made of lightweight and high-strength aeronautical aluminum material to ensure portability.

■ The machines are small and light since their main body is made of aviation aluminum and the sizes of all parts are optimized. The well designed expansion mechanism can realize quick and precise positioning, moreover, the machines are solid enough, with sufficient rigidity for the processing. A variety of available cutters enable the machines to process pipes of different materials and bevel ends with various angles and plain ends. Besides, the unique structure and its self-lubrication function endow the machines with long service life.

■ Position the machine in the center of the tube and install the appropriate tool to complete the preparation.

Technical Parameters

Tools

The tools attached to the products upon delivery are all made of high-speed steel and applicable to process all types of carbon steel. Their types are the five tools in the above diagram.

Installation & Processing

■ During installation, the tools should not touch the feed spindle and the expansion block.

■ The expansion block should not be stretched too deep into the pipe and keep about 20 mm from the pipe end face.

■ During processing, control the feed speed based on cutting conditions to avoid damage of blades and parts in the machine; In case of vibration of the machine or uneven bevel face, timely tighten the expansion hand wheel to prevent the looseness of the expansion, which may cause damages to the machine.

During installation, the tools should not touch the feed spindle and the expansion block.

■ The expansion block should not be stretched too deep into the pipe and keep about 20 mm from the pipe end face.

■ During processing, control the feed speed based on cutting conditions to avoid damage of blades and parts in the machine; In case of vibration of the machine or uneven bevel face, timely tighten the expansion hand wheel to prevent the looseness of the expansion, which may cause damages to the machine.

Safety Instructions

Safety is our priority when pipe beveling machines are designed, and ergonomics is also taken into consideration to ensure product safety and reliability.

■ Operators should read the safety instructions carefully before operation and properly keep them for reference at any time.

■ Operators should be well aware of the products and fully familiar with the key points of product operations.

■ Please wear suitable working clothes and safety shoes before operation.

■ Before operation, ensure the operators are kept away from any live part such as motors and cables.

■ Operators should be kept away from the rotating cutter head as far as possible for safety when the machine is working.

■ The machines should be used in clean environment and should not be used in messy circumstances; if it is necessary to be used in dusty conditions, please wear masks before operation.

■ For electrical pipe beveling machines, please check whether the voltage of the power supply is correct; for pneumatic pipe beveling machines please check whether air pressure and flow of the air source are correct.