Product Details:
Payment & Shipping Terms:
|
Brand Name: | Bohyar | Drive Mode: | Electric |
---|---|---|---|
Material: | High Strength Aluminum | Item No.: | BPP1E Kit1 |
Wall Thickness(mm): | ≤3mm | Rotating Speed: | 3-70 |
High Light: | electric pipe cutting machine,electric pipe cutter |
Small Size Electric Pipe Beveling Machine And Pipe Beveler BPP1E kit1
BPP series of internal-expanding pipe beveling machine is the pipe processing equipment independently developed by our company based on the market and prospect of the pipe service industry. The products are portable, precise, efficient and in modular design, fully meeting customer demands. It's designed for simultaneous facing and beveling tubes and pipes (including carbon steel, alloy steel and stainless steel) from 12.5mm to 240mm I.D. up to a wall thickness of 0.75" (18mm).
than this scope, please choose our split frame machines).
BPP series of pipe beveling machines are widely applied in boiler plants, pressure vessels, heat exchangers, power plant, nuclear power, petroleum, chemical engineering, natural gas, pharmacy, pipe prefabrication plant, pipeline installation engineering, rush-repair work, etc.
■ Portability: Our BPP series are packed with suitcase, which is convenient for carrying and allows you to finish processing outdoors.
■ Quick installation: After being taken out from the suitcase, the machine will be ready only by positioning it at the center of the pipe through the ratchet wrench and equipping it with a suitable cutter. The process will not exceed 3 minutes. The machine will start to work after pressing down the motor button.
■ Safety and reliability: Through multi-stage deceleration by the internal bevel gear of the angle grinder, the planetary reducer and the internal bevel gear of the main shell, the machines can operate under slow rotating speed while keeping large torque, which makes the beveled end smooth and flat and in high quality, and extends the service of the cutter.
Product series
Model |
Processing range (IDmm) |
Wall thickness (mm) |
Rated power (kw) |
Rotating speed (rpm) |
BPP1E kit1 |
12.5-15 |
≤3 |
1.43 |
3-70 |
BPP1E kit2 |
15-20 |
≤5 |
1.43 |
3-70 |
BPP1E kit3 |
20-28 |
≤6 |
1.43 |
3-70 |
BPP3E/ BPP3P |
26-79 |
≤15 |
1.43 |
3-70 |
BPP3PE |
36-90 |
≤15 |
1.43 |
3-50 |
BPP4E/ BPP4P |
45-105 |
≤20 |
1.43 |
34 |
BPP6E/ BPP6P |
65-159 |
≤20 |
1.43 |
34 |
BPP9E |
80-240 |
≤15 |
1.43 |
16 |
*Electric: Rated voltage of 220V, 50/60Hz
■ During installation, the tools should not touch the feed spindle and the expansion block.
■ The expansion block should not be stretched too deep into the pipe and keep about 20 mm from the pipe end face.
■ During processing, control the feed speed based on cutting conditions to avoid damage of blades and parts in the machine; In case of vibration of the machine or uneven bevel face, timely tighten the expansion hand wheel to prevent the looseness of the expansion, which may cause damages to the machine.
During installation, the tools should not touch the feed spindle and the expansion block.
■ The expansion block should not be stretched too deep into the pipe and keep about 20 mm from the pipe end face.
■ During processing, control the feed speed based on cutting conditions to avoid damage of blades and parts in the machine; In case of vibration of the machine or uneven bevel face, timely tighten the expansion hand wheel to prevent the looseness of the expansion, which may cause damages to the machine.
Safety is our priority when pipe beveling machines are designed, and ergonomics is also taken into consideration to ensure product safety and reliability.
■ Before operation, please carefully check for loose connections, blocked rotating parts, or any damage and other factors that may affect the operation or lead to hidden dangers.
■ The applicable scope of the machine should be strictly followed for pipe processing.
■ Do not touch electric switches and buttons with wet hands to avoid electric shock.
■ Before operation, ensure the operators are kept away from any live part such as motors and cables.
■ The machines should not be operated outdoors when it rains.
■ Before disassembly or replacement of cutting tools, please ensure the machines are cooled down to the safety temperature to prevent from burning.
■ It is strictly forbidden to transform the machines or replace accessories with those not produced by the original manufacturer without approval.
Contact Person: Kaisa
Tel: +8615050158266
Fax: 86-512-66065466